Products
MDL100N-12 lipolaser slimming equipment
You are here : Home > Products > Beauty Equipment > Loss Weight > concrete product,,, > MDL100N-12 lipolaser...-
-
MDL100N-12 lipolaser slimming equipment
Laser Diode's output characteristic highly affected by the temperature.
High temperature, high threshold current, then caused the low effects of the Laser diode energy transform and reduced the laser output power, electric power turned into much more heat, increased the Laser Diode's temperature more again.
If Laser Diode can't release the heat effectively, the lifetime will be shorted, even damage the Laser Diode.
Price ConsultingRelated Products
Product IntroductionWorking PrincipleTechnical ParametersVideoDownLoad
· You will have large Diode Lasers probe placed on the targeted fatty areas and secured with straps.
· · Then two smaller Probes Lasers will be placed over the appropriate lymphatic glands and held in place.
· · The Laser Lipo will then be switched on for 10 minutes, re-located and turned on for another 10 minutes, this will be repeated one more time.
· · In order to increase the body’s ability to remove the Triglycerides ,it is necessary to assist this natural process by increasing the metabolic rate. We recommend the use of a vibration massager for about 10 minutes.
· · Three times a week,every 30 minutes, 3-6 weeks per course of treatment (will depend on the goals of the patient).
Lipolaser is the first non-invasive body contouring procedure to effectively remove excess fat without the negative side effects associated with surgical methods.
it was found that the cold laser treatment alone helped patients to reduce inches from their waist, hip and thighs.
Lipolaser utilizes the same cold laser technology developed by Erchonia, which has been shown to emulsify fat and allow it to move to interstitial space
The cold laser technology behind the Lipolaser procedure was shown to exclusively release.
The release of the fat cell contents is the result of the disruption of the cell’s membrane. This membrane disruption, called a transitory pore, is the result of low-level laser stimulation.
This pore allows the evacuation of the cell’s contents into extracellular space Once the contents of the fat cell have been emptied , they are released into interstitial space where it can be passed through the body during its normal course of detoxification.
lipolaser Slimming Equipment: Laser Type is Diode Laser ，Wavelength is 650nm
|
* Number of treatment probes |
8+4 |
|
* Number of diode laser |
64+8 |
|
* Single output Power |
100mW |
|
|
|
|
* Color computer screen |
8 inch touch screen color, |
|
* Power adjust |
40-100mW |
|
* time setting |
0-99 min |
|
* Warranty |
1 year, technology supports forever |
|
* L x W x H |
540 x 540 x 1170 mm, |
|
* Packing L×W×H |
700 x 650 x 380 mm, |
|
* Weight |
30kg (Net weight 10kg) |
